Predicting the damage development in epoxy resins using an anisotropic damage model

For fiber-reinforced plastics, the strain-rate dependent response is governed by the matrix behavior. In this work, the Goldberg model is considered for the epoxy matrix constitutive material model. Moreover, the strain-rate dependency is achieved by direct influence on the elastic modulus, the inelastic strain, and the material strain to failure. In addition, an anisotropic damage response is implemented and extended through a strain-rate dependent definition. Since the constitutive model relies on nonphysical parameters, a parameter study is further performed. Additional numerical investigations using a micro-mechanical model are performed. Tension and shear loading conditions are evaluated and the influence of different strain rates is explored. Furthermore, the implemented anisotropic damage model is compared and discussed against an isotropic damage model.     

Aromatic Linkers Unleash the Antiproliferative Potential of 3-Chloropiperidines Against Pancreatic Cancer Cells

In this study, we describe the synthesis and biological evaluation of a set of bis-3-chloropiperidines (B−CePs) containing rigid aromatic linker structures. A modification of the synthetic strategy also enabled the synthesis of a pilot tris-3-chloropiperidine (Tri-CeP) bearing three reactive meta-chloropiperidine moieties on the aromatic scaffold. A structure–reactivity relationship analysis of B−CePs suggests that the arrangement of the reactive units affects the DNA alkylating activity, while also revealing correlations between the electron density of the aromatic system and the reactivity with biologically relevant nucleophiles, both on isolated DNA and in cancer cells. Interestingly, all aromatic 3-chloropiperidines exhibited a marked cytotoxicity and tropism for 2D and 3D cultures of pancreatic cancer cells. Therefore, the new aromatic 3-chloropiperidines appear to be promising contenders for further development of mustard-based anticancer agents aimed at pancreatic cancers.     

Ballistic behavior of plain and reinforced concrete slabs under high velocity impact

This work presents a numerical simulation of ballistic penetration and high velocity impact behavior of plain and reinforced concrete slabs. In this paper, we focus on the comparison of the performance of the plain and reinforced concrete slabs of unconfined compressive strength 41 MPa under ballistic impact. The concrete slab has dimensions of 675 mm × 675 mm × 200 mm, and is meshed with 8-node hexahedron solid elements in the impact and outer zones. The ogive-nosed projectile is considered as rigid element that has a mass of 0.386 kg and a length of 152 mm. The applied velocities vary between 540 and 731 m/s. 6 mm of steel reinforcement bars were used in the reinforced concrete slabs. The constitutive material modeling of the concrete and steel reinforcement bars was performed using the Johnson-Holmquist-2 damage and the Johnson-Cook plasticity material models, respectively. The analysis was conducted using the commercial finite element package Abaqus/Explicit. Damage diameters and residual velocities obtained by the numerical model were compared with the experimental results and effect of steel reinforcement and projectile diameter were studies. The validation showed good agreement between the numerical and experimental results. The added steel reinforcements to the concrete samples were found efficient in terms of ballistic resistance comparing to the plain concrete sample.     

平板冲击加载下对双相钢动态损伤演变的研究

利用一级轻汽炮以一击二的方式对2种不同热处理状态的双相钢进行加载,采用多普勒测速系统对加载过程中样品的自由面粒子速度进行测量,通过金相显微分析、纳米压痕分析对样品进行表征,探讨了双相钢的层裂损伤演变。结果表明:孔洞并没有像准静态损伤理论一样在相界面处优先形核长大,而是在马氏体内部形核,然后长大贯通形成微裂纹贯穿整个马氏体,形成穿晶断裂; 由于相界面对冲击波具有反射与透射作用,冲击波从高阻抗的相传入低阻抗的相内时会在高阻抗相内形成拉伸脉冲,从而引起层裂损伤; 相界面越多,在高阻抗相内产生拉应力并形成孔洞的几率越大,样品层裂强度也越低。     

Electrochemical corrosion behavior of LDX 2101® duplex stainless steel in a fluoride-containing environment

The effect of fluoride on the electrochemical corrosion behavior of an LDX 2101® duplex stainless steel (DSS) was studied. Open-circuit potential (E_OC) and electrochemical impedance spectroscopy (EIS) measurements were carried out in artificial saliva and with the addition of fluoride (1 wt% NaF). The electrochemical corrosion behavior of the AISI 316L austenitic stainless steel (SS) was also evaluated for comparison. Both open-circuit potential and EIS results indicate that DSS and austenitic SS undergo spontaneous passivation due to spontaneously formed oxide film passivating the metallic surface, in the simulated aggressive environments. However, LDX 2101® exhibits superior corrosion resistance as compared with AISI 316L, and this improvement is ascribed to the formation of a passive film which shows a higher protective effect than the one formed on AISI 316L.     

汽车悬架球头拉杆冷成形技术

为提高生产效率、改变原来通过车削加工汽车悬架球头拉杆的方式,提出了一种球头拉杆的多工位冷镦成形工艺。基于DEFORM-3D软件建立了有限元模型,对球头拉杆的塑性成形过程进行了仿真,研究了预成形凸模入模角α、预成形凹模圆角R1、终成形凹模圆角R2以及终成形凹模入模角β等工艺参数对球头拉杆成形的影响,并进行了正交试验,以模具在球头拉杆成形过程中所受载荷及工件损伤值为优化目标,获得了合理的工艺参数组合。结果表明:在保证工件成形质量及模具寿命的前提下,当预成形凸模入模角α为30°、预成形凹模圆角R1为12 mm、终成形凹模圆角R2为3 mm、终成形凹模入模角β为60°时,模具载荷及工件损伤有显著的降低。采用优化后的参数进行试模生产,工件成形质量较好,验证了模拟结果的可信性,能够有效地指导工艺设计人员的设计工作。     

Thermally driven failure of Nd:YVO4 amplifier crystals

We report on an unusual failure pattern resulting from thermally driven fracture of laser amplifier single crystals. The pattern led to some confusion with regard to the point of initiation due to the coalescence of hackle lines to a region within the fracture surface, rather than the more common divergence of hackle away from the origin. The pattern leads to new fracture terms: Hackle node - the coalescence of hackle marks to a point of prior compression. The feature is produced as a thermally-generated, centrally-located compressive region transforms to tension thereby drawing crack propagation and hackle to the compressive region, forming an internal terminus. Hackle terminus – a hackle node formed by final crack propagation within the component. As part of the analysis, the fracture toughness and slow crack growth constants of neodymium doped, yttrium ortho-vanadate (Nd:YVO₄) were measured. Nd:YVO₄ exhibits slow crack growth and is very brittle with a fracture toughness of only 0.48 MPa√m.     

污泥生物炭中氮硫行为及环境效应研究进展

污泥生物炭中氮硫元素含量高，其氮硫行为和环境效应对全球气候变化的影响不容忽视。以往的研究中，研究者往往以富碳生物炭作为主要研究对象，关注碳对全球气候变化的行为和功效，而对氮硫元素的作用关注不够。本文从原始污泥基本性质到其热解过程，再到生物炭的老化，逐步对污泥生物炭整个生命周期内氮硫的行为及其环境效应研究进行综述，并对未来应注重开展的研究方向进行展望，为生物炭中氮硫元素固定、释放及与之关联的环境效应和温室气体排放控制研究提供理论基础。分析表明，污泥中氮元素含量普遍高于硫元素，且热解过程中氮比硫更容易转移至气相产物。氮硫元素随热解温度的增加，在三相产物中的分配都是炭中持续减少，油中先增后减，气中一直增加。高温（＞800℃）条件下，气相中的氮含量高于固相，而硫元素则仍然主要存在于固相中。污泥生物炭老化及其环境效应研究表明，污泥生物炭氮硫元素与土壤的相互作用及其温室效应问题在今后的研究中应引起重视。     

基于高斯混合隐马尔科夫模型与人工神经网络的紧急换道行为预测方法

为了有效降低因驾驶员紧急换道行为而诱发的交通事故，提高道路交通事故链阻断效率，提出一种基于高斯混合隐马尔科夫模型（GMM-HMM）和人工神经网络（ANN）的紧急换道行为预测方法。首先利用GMM-HMM对车辆行驶状态以及驾驶行为连续观察序列进行换道意图辨识，采用ANN预测下一时段的驾驶行为，再预测换道过程中的横向加速度变化率，从而判断紧急换道的危险程度。驾驶员在环仿真实验及实车实验结果表明，该方法预测避险成功率达92.83%，实验避险成功率达90.32%。该方法能有效地对紧急换道行为进行提前警告与干预。     

金沙江上游水电站应对白格堰塞湖灾害的措施及经验

2018年10月、11月,西藏自治区昌都市江达县白格村两次发生山体滑坡造成金沙江断流并形成白格堰塞湖,给金沙江上游沿岸人民生产生活设施造成巨大安全威胁和超过百亿元的经济损失。华电金沙江上游水电开发有限公司组织所属企业及参建单位快速应对,采取撤离避让、工程防护、人工干预、生产恢复,推动后续处置、风险评估等措施,最大限度减轻了对金沙江上游叶巴滩、拉哇、巴塘、苏洼龙等在建水电站的灾害损失和后续影响,为类似灾害的处置提供借鉴经验。